![[Return to Homepage]](/assets/imgs/RAMlogo.png)
Mold Star 15, 16 & 30
1A:1B Mix By Volume Platinum Silicone Rubbers
Mold Star™ 15 SLOW, 16 FAST, & Mold Star™ 30 are easy-to-use liquid silicone rubbers that can be measured by volume and are low in viscosity so vacuum degassing is not required. Mold Star™ silicones are strong and lasting mold materials great for casting plaster, wax, resins, etc. The pot life of Mold Star™ 15 SLOW is 50 minutes and cure time is 4 hours at room temperature. Mold Star™ 16 FAST is a faster material with a 6 minute pot life and 30 minute cure time that is available in a 400 ml cartridge.
Note: THI-VEX™ is NOT compatible with these Mold Star™ rubbers.
Price and Purchasing
Call to Order
Document Downloads
Technical Bulletins, Safety Data Sheets, Certifications
Videos
DIY Custom Valentine Candle Making Tutorial
How Vacuum Formed Packaging Is Made Using a High Temp Epoxy Tool
How To Make a DIY Face Shield Using Mold Star™ 16 Silicone and Smooth-Cast™ 65D Liquid Plastic
How To Make a Custom Steering Wheel: Part 1, Silicone Moldmaking
How To Make a Custom Steering Wheel: Part 2, Resin Casting
How To Make a Mold For Foam Cosplay Armor
How-To Create Custom Shirt Buttons
How To Make a Taxidermy Fish Mount Base Using Free Form® Air Epoxy Putty
Mold Making and Casting Using Mold Star 30 and ONYX Resin
Mold Making Tutorial: How to Shrink a Mold for Smaller Reproductions
How To Make a Simple One Piece Silicone Mold - Pour On
How To Make a 2 Piece Silicone Rubber Mold | Mold Making Tutorial
How To Make a 2 Piece Silicone Mold of a Knife | Mold Making Tutorial
Mold Making Tutorial: Forensics Impressions using Fast Curing Silicone Rubber
How To Make Artificial Finger Coral Custom Aquarium Decorations
Aquarium Decoration Tutorial: Casting a Clear Conch Shell in Crystal Clear Resin
How-To Galleries
Mold Star® 15 Demo: Easy Use, High Tear Strength Platinum Silicone
Making Your Own Hyper-Realistic Finger Corals Using Mold Star Silicone Rubber and Smooth-Cast Plastic
Making Your Own Hyper-Realistic Bulb-Tip Sea Anemone Using Smooth-On Silicone
Amazing Nautilus Concrete Sink goes from Design to Production
Images
Mold Star® 15 two piece mold used for prototyping.
Mold Star® 15 two piece mold used for casting countless color and effects combinations of SmoothCast® resin, SO-Strong® tints and Cast Magic® powders.
old Star® 16 FAST dispensed in 400 ml cartridges is able to capture tire tracks for forensics applications.
Forensic mold from MoldStar® 16 FAST is used to cast positive resin tread pattern.
Mold Star® 16 silicone mold rubber used for prototyping plastic handle.
Mold Star® 30 mold captures perfect detail.
Image of Mold Star 15, 16 & 30
Mold Star® 15 Split mold of SmoothCast® 320 urethane resin and Cast Magic® powders.
Mold Star® 15 mold used to cast SmoothCast® 325 urethane resin tinted with SO-Strong® green.